20
TARGET RECOVERY
5. If the target sounds small (faint and soft), sprinkle
some of the target dirt on top of the Gold Bug-2
search coil. If you get a response, you can set aside
the rest of the dirt in your hand and concentrate
on the dirt on your coil. If you get no response from
your coil, sprinkle more dirt on the coil until you hear
a signal. By repeating this process several times you
should be able to identify even a very small target.
CAUTION: Use the sprinkle method sparingly and
carefully. If you wear a hole in the top of your
search coil, it won’t be covered by our Lifetime
Warranty.
6. Recheck your target area to make sure you’re not
leaving a second target behind.
7. Scrape all loose dirt back in the hole and move on
only after the area appears as it was before you
got there.
To Next Page
Loading...
