EasyManua.ls Logo

Fishman LDS9000 - Prime the Genius FreeFlow Dispense Tip; Tip Cap Removal and Attachment; Initial Fluid Flow Check

Fishman LDS9000
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23 Fishman Corporation USA Toll Free 1-800-433-2115
22
Fishman Corporation USA Toll Free 1-800-433-2115
8.0 Prime the Genius
®
FreeFlow
Dispense Tip
8.1 Remove tip cap from the barrel
by twisting counter-clockwise
and pulling. Attach the same
dispense tip being used
on the automation system.
8.2 Hold the dispense tip over the provided
dot chart as shown, press the foot pedal
intermittently until the uid begins to ow
towards the end of the Genius
®
dispense tip.
Goal: To stop the uid when ush with the end of the Genius
®
dispense tip with no air pockets.
8.3 If too little uid: Continue
to press on the foot pedal
intermittently causing the
uid to ow to the tip.

Related product manuals