12
XLR Pre / Post Switch
Choose between a true D.I. (pre EQ) or an affected XLR output (post EQ).
1. XLR Post
Signal Path: Instrument Signal Ö Input Gain Ö Depth Ö EQ Ö Compression Ö
Volume Ö Phase Switch Ö XLR Out
Post is useful in live venues (especially if you are mixing from onstage) where you
want your personal “dialed-in” sound to come through the PA.
2. XLR Pre
Signal Path: Instrument Signal Ö Input Buffer Ö Phase Switch Ö XLR Out
You’ll fi nd that this true direct or “DI” output produces a warm and uncluttered
signal that is exceptional for recording. Set the Pre / Post switch to the Pre posi-
tion when you want a “fl at” DI signal going to the board and you wish to leave it
to the sound-person or recording engineer to dial up the instrument tone from
the console.
To Next Page