Fishman PRO-EQ - Stage Setup Diagram

13
2a. Alternate into bass amp (especially
for upright)
For a cleaner and less colored
sound, try bypassing the preamp in
your bass amp and plug the output
from the Platinum Bass directly into
the effects return or the power amp
input at the back of your amp.
3. Splitter / “Transparent” DI:
If you wish, you may bypass all
the Platinum’s controls for a true
buffered DI into both the PA and
a bass amp.
Back of Bass Amplifier
1/4" Instrument Cable
plugged into Effects Return
Send Return
Input
Output
XLR Cable
XLR Switch set for PRE EQ
XLR Out
PA System
Bass Amplifier
Tuner / Send
Input