EasyManua.ls Logo

Fiskars 1054792 - Manual Watering and Timer Control; Installation and Troubleshooting

Fiskars 1054792
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.Delays of 0, 24, 48, and 72 hours are
possible. Delay time can be changed by
pushing + or at any time. 3.Display will
flash between clock and hours remaining
before programmed cycle resumes. 4.To
remove watering delay, turn dial to O
and then back to Run or reduce the delay
time to 0.
Manual (instant) watering 1.To water
instantly without interrupting the set cycle,
press the button to start watering.
2.This mode will function only when the
dial is on Run position. 3. For timer, dual:
Choose Left or Right valve (Valves can
have dierent watering duration set).
4.Press the + or button to adjust from
0 to 240 minutes at any time. 5.To resume
programmed cycle, press the button
again or rotate the knob to O and back
to Run.
O Turning the dial to the O position
from any other position will stop the man-
ual or programmed watering immediately.
Reset Pressing the Reset button for 2
seconds will erase all the programs and
the Timer will return to factory shipped
condition.
Installation 1.Attach Timer to an outdoor
hose faucet and turn faucet on after pro-
gramming. 2.Not for use on outlet end of
‘Y’ connectors or other hose accessories.
Troubleshooting
problem: There is no display.
Check if: 1.Batteries are installed properly.
2.Batteries are very low.
problem: Timer does not water or
does not come on at desired time.
Check if: 1.The dial position is at Run.
2.Faucet is on. 3.Clock is set to correct
time including AM and PM. 4.Batteries
are low. 5.For timer, dual: Desired outlet
(Left or Right) is programmed. 6.Rain
delay is on. 7.Start time is set to desired
time including AM and PM.
problem: Water won’t turn o.
Check if: 1.Watering duration is set to
desired time 2.The Manual mode is on
3.No power/batteries are included.
Warranty terms The manufacturer shall
repair or replace, through the dealer, any
parts of the product found to be faulty
due to manufacturing defects, for a period
of 24 months as of the date of purchase.
the warranty does not cover defects
due to tampering, improper use or
wear. The warranty is valid only if the cus-
tomer returns to the product to the dealer
complete in all its parts together with the
receipt or other document proving the
date of purchase.

Related product manuals