11
3. Repeat on the other side.
Attaching a new wristband
Before you attach a new wristband, first identify the top and bottom bands. The top
band has a watch buckle at the end of it. The bottom band has notches.
To attach the band:
1. Place your Blaze face down. When it is face down, two buttons are on the left
and a single button is on the right.
2. Find the pin opposite the removal switch, and slide it into the hole in the
frame.
3. Pull the switch while sliding the band into place then release it to lock the
band into the frame.
To Next Page
Loading...
Need help?
General
