Change the band
Inspire HR comes with a small band attached and an additional large, bottom band
in the box. Boththe top and bottom bands can be swapped with accessory bands,
sold separately on fitbit.com. For band measurements, see "Band size" on page41.
Fitbit Inspire and Fitbit Inspire HRbands are compatible with both trackers.
Remove a band
1. Turn over Inspire HR and find the quick-release lever.
2. While pressing the quick-release lever inward, gently pull the band away from
the tracker to release it.
3. Repeat on the other side.
Attach a band
1. To attach a band, hold the band and slide the pin (the side opposite the quick-
release lever) into the notch on the tracker.
13
To Next Page
Loading...
