7
FJ Dynamics Technology Co., Ltd. All rights reserved.
Battery indicator: indicates the battery level with a bar graph and a percentage. The battery
level of 0-5% is shown with no bars, 6-20% with one bar, 21-40% with two bars, 41-60% with three
bars, 61-80% with four bars, and 81% and above with all five bars. It is recommended to fully
charge the product before using it for the first time. The higher remaining power, the more
accurate battery level percentage. Charge the product whenever the battery level is below 20%
to preserve the service life.
Note: When you plug the product into a power source like a solar panel or a wall outlet for the first
time, it may take a minute for the product to check and adjust its charging circuit before charging.
Input power: input power in watts during operation, or the fault code in case of error.
DC output: DC output power during operation, or the fault code in case of error.
AC output: AC output power during operation, or the fault code in case of error.
Note: This value varies with the power consumption of the connected devices, and this variation is
evident when the port initially outputs power to a connected device.
USB output: USB output power during operation, or the fault code in case of error.
AC charging cable indicator: displayed when an AC charging cable is plugged.
Temperature alarm: displayed when the inverter or the battery is overheated.
Fan cooling: displayed when the fan is running.
UPS: displayed when the product is charged from a wall outlet while providing power for devices
through its output ports.
To Next Page
Loading...