17
FJ Dynamics Technology Co., Ltd. All rights reserved.
Troubleshooting
When the product does not discharge:
1)
Check whether the cable is connected properly.
2)
Check whether the total output power exceeds the rated value.
3)
Check whether the temperature of the product is too high.
When the product cannot be charged:
1)
Check whether the AC wall outlet is in good condition and the AC charging cable is properly
connected.
2)
Check whether the battery pack is properly connected and switched on.
3)
Due to the over-temperature protection, the product cannot be charged immediately after
discharge. When this occurs, wait for an hour and try again.
Maintenance and Warranty
Maintenance
Check the product as needed. If it is not frequently used, charge and discharge it every 3 months
at a normal temperature to preserve its service life. Regularly check all ports and chargers for any
debris, dirt, damage, and corrosion.
Do not disassemble the product by yourself.
Do not cover the device with towels, clothes, or other items. Regularly check the side vents for
dust and foreign matters, and clean them as specified in the manual.
Disposal and recycling
Do not put the product and its accessories in the trash can. Dispose of them in
accordance with local laws and regulations. For additional information, refer to
www.epa.gov.
Statement
Copyright © FJ Dynamics Technology Co., Ltd. All rights reserved.
All trademarks cited here are the property of their respective owners.
The information contained in this manual is subject to change without notice. FJ Dynamics is not
liable for technical or editorial errors or omissions contained in this manual. First edition: August
2021.
To Next Page
Loading...