Flama 1327FL - Troubleshooting

31
English
TROUBLESHOOTING
ANOMALY PROBABLE CAUSE SOLUTION
The appliance does not
turn on.
It is not connected to a
power source.
Plug it into the wall outlet.
The water tank is full. Empty the water tank.
The water tank is not
correctly placed.
Reposion the water tank.
Temperature < 5°C or
> 35°C.
Appliance protecon.
Poor performance.
The air lter is clogged. Clean the air lter.
The intake or outlet
ducts are obstructed.
Remove the obstrucon from the
intake or outlet ducts.
Lile dehumidifying
capacity.
Dirty air lter. Clean the lter.
Air intake or outlet
blocked.
Unblock the air intake or outlet.
Noise.
The appliance is
unstable.
Check that the appliance is in a
stable posion.
The air lter is clogged. Clean the air lter.
E2 Humidity sensor. Contact technical assistance.
LO
Ambient humidity
below 20%.
The dehumidier turns o to
protect itself.
Oi
Ambient humidity
above 90%.
CI
Protecon against low
temperature.
Ch
Protecon against high
temperature.