EasyManua.ls Logo

Flama 698FL - Specific Function Explanations; Interior Light Function; Delayed Start Function; Smart Function Button

Flama 698FL
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
English
Press the Start/Pause buon to start the
program.
NOTES: To change the programmed
temperature or me, press the
temperature and me selecon
buon; you can increase or decrease
the temperature and me using the
temperature and me adjustment buons.
Aer the program nishes, the fan
connues to operate if the temperature
inside the basket is above 100 °C.
Some foods need to be srred during
cooking. To sr them, slide the basket out
of the body and shake it. Then, slide the
basket back into the body; cooking will
connue.
Basket Preheang
Press the ON/OFF buon; the fryer enters
operang mode, and the control panel
becomes acve.
Press the basket selecon buon (Cuba
1 or Cuba 2); the buon blinks, and the
basket display blinks.
Set the temperature to 180 °C and the
me to 5 minutes.
Press the Start/Pause buon to preheat
the basket(s).
Interior Light Funcon (light)
Press the buon to illuminate the inside of
the basket; the light will automacally turn
o aer 60 seconds.
Press again to turn it o before 60 seconds.
Delayed Start Funcon (Delay
start)
Press the ON/OFF buon; the fryer enters
operang mode, and the control panel
becomes acve.
Press the Delay Start buon; the basket,
program buons, and display will blink.
Program the me with the me
adjustment buons. The default me is 90
minutes; you can adjust the me between
10 and 900 minutes.
Program the fryer (basket selecon,
program...).
Press the Start/Pause buon to start the
program; a countdown will begin, and the
program will start aer the countdown
ends.
Smart Funcon Buon
Press the ON/OFF buon; the fryer enters
operang mode, and the control panel
becomes acve.
Program both baskets (basket selecon,
program, etc.).
Press the Smart buon.
Press the Start/Pause buon to start the
program; the program with the longer me
will start.
The basket with the longer set me will
start rst, unl it reaches the same me
as the other basket, so that both programs
end simultaneously.

Related product manuals