To Next PageTo Next Page
Need help?Do you have a question about the FlashLogic FLRSGM10 and is the answer not in the manual?
Essential steps before starting the installation process.
Details of the main module, T-harness, and connectors.
Information regarding the Weblink cable accessory.
Overview of the RF Kit accessory.
Overview of the Telematic Kit accessory.
Diagram showing module and vehicle wiring connections.
Diagram illustrating ignition and PK3 harness connections.
Step-by-step guide for programming the module.
Procedure for entering and confirming Valet Mode.
Important notes and requirements for remote programming.
Guide for navigating module settings and exiting the interface.
Chart detailing configuration menu and specific options.
Adjustable setting for module run time.
Adjustable setting for wait-to-start delay.
Setting to configure horn event triggers.
Setting to adjust horn chirp width.
List and explanation of common remote starter error codes.
Interpreting LED 1 status during programming.
Interpreting LED 1 status during remote start.
Interpreting LED 1 status when ignition is off.
Step-by-step guide for resetting the module.
Checklist items for vehicle doors, locks, and trunk.
Checklist items for remote start, shutdown, and RAP.
Final checks including hood, warning sticker, and completion.
General| Type | Remote Starter |
|---|---|
| Operating Voltage | 12V DC |
| Remote Start | Yes |
| Engine Immobilizer Bypass | Yes |
| Compatibility | GM Vehicles (Specific Models and Years, check compatibility chart) |
| Features | Remote start, keyless entry, trunk release |
| Current Consumption | Low power consumption |
| Data Bus | Yes |
| Security | Integrates with factory security system |
| Remote Start Activation | 3x lock start |
| Bypass Type | Data Bypass |
| Smartphone Control | Optional with additional module |
| Warranty | 1 year |
