CONTENTS
Section 1 Information and Requirements PAGE
1.0 Appliance Information 3
1.1 Conditions of Installation 4
1.2 Flue and chimney suitability 4
1.3 Fireplace / surround suitability 5
1.4 Shelf position 5
1.5 Chimney inspection 5-6
1.6 Fire place opening / catchment space 6
1.7 Fitting to Chair bricks 8
1.8 Precast Flues 8
1.9 Metal Flue boxes 8
1.10 Hearths 9
1.11 Spillage Monitoring System 9
Section 2 Installation of Fire
2.1 Unpacking the fire 10
2.2 Installing the fire box 10-18
2.3 Gas Tightness & Inlet Pressure (MC models) 19
2.4 Gas Tightness & Inlet Pressure (SC models) 19-20
Section 3 Assembling Fuel Bed and Commissioning
3.1 Assembling the ceramics and fuel bed 20-23
3.2 Lighting the appliance (MC models) 24
3.3 Lighting the appliance (SC models) 24-25
3.4 Checking for clearance of combustion
products 25
Section 4 Maintenance
4.1 Removal of the Burner Assembly (Manual) 26
4.2 Removal of the Piezo Igniter 26
4.3 Removal of the Control Tap 27
4.4 Removal of the Pilot Assembly 27
4.5 Removal of the Burner Assembly (Slide) 27-28
4.6 Removal of the Battery Ignitor 28
4.7 Repacing the Battery 28
4.8 Removing the Oxy-Pilot Assembly 29
4.9 Replacing the Control Cable 29-30
This appliance is manufactured by:-
BFM Europe Ltd, Trentham Lakes, Stoke-on-Trent, ST4 4TJ
2
To Next Page
Loading...
