EasyManua.ls Logo

Flavel Regent User Manual

Flavel Regent
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Supplied By www.heating spares.co Tel. 0161 620 6677
REGENT
RADIANT CONVECTOR GAS FIRE
Installation and Maintenance Instructions
Hand these instructions to the user
Model No’s FRGCN0MN & FRGCP0MN are for use on Natural Gas
(G20) at a supply pressure of 20 mbar in G.B. / I.E.
Question and Answer IconNeed help?

Do you have a question about the Flavel Regent and is the answer not in the manual?

Flavel Regent Specifications

General IconGeneral
BrandFlavel
ModelRegent
CategoryGas fireplace
LanguageEnglish

Summary

Appliance Data

Installation Instructions

Installation Requirements and Suitability

Covers legal requirements, flue, fireplace, hearth, wall mounting, and clearances.

Flue and Chimney Inspection

Procedures for inspecting flue systems before installation.

Appliance Installation Steps

Covers packing, installation process, gas connection, and soundness testing.

Commissioning and Final Checks

Includes lighting, spillage testing, and final checks after installation.

Maintenance Instructions

General Access for Servicing

Steps for gaining access to internal components for servicing.

Removing the Burner Assembly

Procedure for safely removing the burner assembly from the fire.

Removing the Gas Valve

Steps to disconnect and remove the gas valve from the fire.

Removing the ODS-Pilot Assembly

Guide for removing the Oxygen Depletion Safety pilot assembly.

Removal / Replacement of the Radiants

Instructions on how to remove and replace radiant elements.

User Operation and Safety

Spillage Monitoring System

Explanation of the safety system that shuts off the fire if flue is blocked.

Operating the Fire

Step-by-step instructions on how to safely light and operate the appliance.

Cleaning Instructions

Guidelines and warnings for cleaning the fire's components.