Flex JS 18.0-EC User Manual

JS 18.0-EC
19
Directive 2012/19/EU on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
Raw material recovery instead of waste
disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identi󰘰ed for recycling
according to material type.
WARNING!
Do not throw batteries into the household
waste, 󰘰re or water. Do not open used
batteries.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
NOTE
Please ask your dealer about disposal options!
-Declaration of Conformity
We declare under our sole responsibility
that the product described under “Technical
speci󰘰cations” conforms to the following
standards or normative documents:
EN 62841 in accordance with the regulations
of the directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
12.11.2019; FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Exemption from liability
The manufacturer and his representative are
not liable for any damage and lost pro󰘰t due to
interruption in business caused by the product
or by an unusable product. The manufacturer
and his representative are not liable for any
damage which was caused by improper use of
the power tool or by use of the power tool with
products from other manufacturers.

Flex JS 18.0-EC Specifications

General

Brand	Flex
Model	JS 18.0-EC
Category	Power Tool
Language	English