Flex XFE 7-15 User Manual

XFE 7-15 / XCE 10-8 Instruction manual
11
Operating instructions
WARNING
Risk of electric shock! Before carrying out
any work on the power tool, always pull out
the mains plug.
Before switching on the power
tool
Unpack the polisher and check that there
are no missing or damaged parts.
Attaching or changing
the polishing tool
– Pull out the mains plug.
– Firmly press polishing tool, centred on
theeye, onto the Velcro pad (8).
Useundamaged polishing tools only.
– Insert the mains plug into the socket.
– Switch on the polisher (without engaging
it) and run the polisher for approx.
30seconds. Check for imbalances
andvibrations.
– Switch off the polisher.
Switch on and off
Brief operation without engaged switch
rocker
– Press and hold down the switch.
– To switch off, release the switch.
Continuous operation with engaged
switch rocker
– Press and hold down the switch.
– To lock into position, hold down the
locking button and release the switch.
– To switch off, briefly press and release
the switch.

Flex XFE 7-15 Specifications

General

Brand	Flex
Model	XFE 7-15
Category	Sander
Language	English