EasyManua.ls Logo

FlexArm S-36 - Safe Operation

FlexArm S-36
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10/29/2020 REV. 003 3
SAFE OPERATION: READ THIS FIRST
Read the entire unit manual before operating the machine.
Do not remove shipping zip tie strap until instructed in this manual.
Wear eye protection when operating this machine.
Do not wear jewelry when operating this machine. Tie hair back when using this machine.
Do not wear gloves when operating this machine.
Turn off the air supply before adding oil to the filter / lubricator.
Turn off the air supply before preforming any maintenance operations.
Hearing Protection is recommended.
Removing the tool or weight from the arm will allow the arms to extend rapidly possibly causing
damage or injury.
Keep hands clear of the motor chuck and tap when the motor is running.
Keep hands clear of pinch points when operating the machine.
Do not alter or modify the FlexArm.
Periodically inspect for damage, loose hardware or anything irregular on the FlexArm.
Preform regular maintenance according to this manual.
Do not alter or modify the machine.
Read the FlexArm Limited Warranty before performing any maintenance or repairs.
FlexArm is not responsible for accident or injury resulting from the misuse of this machine or for use
other than originally designed and intended.
IT IS IMPERATIVE THAT THE TABLE OR MOUNTING SURFACE BE LAGGED TO THE FLOOR AND SECURE BEFORE
INSTALLING THE FLEXARM. Failure to secure the table or mounting surface could result in serious injury to the
operator as well as the FlexArm.