FlexDSL Orion3 User Manual

FlexDSL Telecommunications AG
Steinackerstrassse 31
8902 Urdorf
Switzerland
Page 1/9
Tel: +41 44 741 52 90
Fax: +41 44 741 52 93
Email: info@flexdsl.ch
Web: www.flexdsl.ch
Ddd
The FlexDSL Orion3 product family offers a broad range of products, which are based on the latest SHDSL.bis standards
(ITU-T G.991.2 & ETS TS 101 524) The FlexDSL Orion3 supports TC-PAM16/32 and the new TC-PAM4/8/64/128 line coding.
The FlexDSL Orion3 allows symmetrical data and voice transmission at speeds up to 15.2Mbps over a single pair of copper.
In addition, the FlexDSL Orion3 supports DSL channel bonding for up to 4 copper pairs in order to achieve speeds to
60.8Mbps. The SFP module (available on selected models) allows Ethernet data transmission over mixed Copper and Fiber
media.
FlexDSL Orion3 SHDSL.bis Extended modems can provide up to 2 E1 interfaces, which support framed and unframed
services (G.703/G.704). An integrated 2 or 4 port Ethernet layer 2 managed Switch with VLAN support (10/100BaseT)
ensures connectivity to IP services. Beside of E1 and Ethernet the additional Nx64 interfaces can be configured as V.35, V.36,
X.21, V.28, or RS232/RS485 interface (cable selectable).
Like all FlexDSL Orion products, the Orion3 SHDSL.bis modems family is based on industrial components, have extended
temperature range, advanced surge protection and produced in Switzerland.
Possible Applications
SHDSL.bis
Up to 60Mbps
E1 / Nx64 /Ethernet
FlexDSL Orion3
Features
• Up to 15Mbps Data Transmission per Copper Pair
• SHDSL and SHDSL.bis, TC-PAM16/32
• Additional TC-PAM4/8/64/128 Available
• 1, 2 or 4 Copper Pairs Support
• 2 or 4 Port Ethernet Switch (10/100BaseT)
• SFP connector for mixed Copper and Fiber applications
• QoS, VLAN and RSTP Support
• E1 (G.703/704, Balanced/Unbalanced)
• Nx64 (V.35, V.36, X.21, V.28) and RS-232/485
• Multi-Service Operation
• Point-to-Point and Point-to-Multipoint Operation
• Console Port, Telnet, Web, SNMP Management
• 24/48VDC Powered, Low Power Consumption
• Included Primary Protection
• Robust DIN-Rail Metal Enclosure
• Industrial Temperature Range Available
d)
a) Ethernet Transmission Point-to-Point
b) Ethernet Transmission Point-to-Multipoint
c) Ethernet Add/Drop over a Long Copper Line
d) Ethernet Transmission over Copper and Fiber
a)
b)
c)

FlexDSL Orion3 Specifications

General

Brand	FlexDSL
Model	Orion3
Category	Modem
Language	English

Summary

FlexDSL Orion3 Product Overview

Features

List of key features for the FlexDSL Orion3 product family.

Possible Applications

Illustrates various deployment scenarios for the FlexDSL Orion3.

Quick Installation Guide

Enter an Orion3 Device

Instructions for accessing the Orion3 device via Monitor or Telnet interface.

Configure an Orion3 Device

Step-by-step guide for initial device configuration and setup.

Technical Specifications

SHDSL Interface Specification

Detailed specifications for SHDSL interfaces, including line code and bit rate.

Ethernet Interface Specification

Specifications for Ethernet interfaces, including data rate and protocols.

E1 (G.703) Interface Specification

Technical specifications for E1 interfaces, including line code and bit rate.

Nx64 and RS-232/RS-485 Interfaces

Technical details and connector pinouts for Nx64 and RS-232/RS-485 interfaces.

Monitor and Power Specifications

Specifications for the Monitor/Local Craft Terminal and Power Supply.

Panel Descriptions

Panel Description V84S (Version with SFP interface)

Description of the panel layout for the V84S model with SFP.

Panel Description V841 (Special Industrial Version)

Description of the panel layout for the V841 industrial model.

Panel Description V84IS (Special Industrial Version with SFP interfaces)

Panel layout for the V84IS industrial model with SFP.

Panel Description (Version with Serial Interface)

Panel layout for the serial interface version of the device.

Environment, EMC and Safety

Available Models