9
NORDIC S3
2.1. POSITIONING REQUIREMENTS
The unit is designed to be installed in boiler rooms,
laundry rooms, stores or other suitable areas. The unit
can be in a cold location.
Positioning must comply with
individual countries’ electrical
safety legislation. Check which
rules apply in your country.
i
The unit should be positioned in such a way that there is
no danger of noise nuisance in nearby rooms.
• If the unit is located in a warm room where a lot
of moisture is generated, condensation may form
on the outside of the unit during periods when the
outside temperature is low.
The base should be stable and level.
BOILER ROOM
BOILER ROOM
LIVING ROOMS
LIVING ROOMS
suitable insulation
To Next Page
Loading...
