Why is there low air volume in my Flexit UNI 3 Air Handlers?
If you're experiencing low air volume with your Flexit Air Handlers, you should first check the unit's speed setting. Next, ensure that the filters are properly and tightly installed. Finally, inspect the intake grille to make sure it's clear.
What to do if the fans are not working in my Flexit Air Handlers?
If the fans in your Flexit Air Handlers aren't working, first ensure the unit is properly connected to a power source. Then, verify that the thermostat hasn't tripped. If it has, attempt to reset it by pressing the reset button, and also reset it on the automatic panel.
How to fix cold draughts from Flexit UNI 3 Air Handlers?
If you're experiencing cold drafts from your Flexit Air Handlers, first check the selected supply temperature on the operating panel. Next, verify that the rotor is rotating correctly. Also, ensure that the heating element is functioning. Finally, check if a new extract filter is needed.
Explains essential safety symbols, warnings, and precautions for unit operation.
Details the function and adjustment of supply and extract fans.
Describes the type and purpose of supply and extract air filters.
Explains the operation of the HR-R rotary wheel heat recovery system.
Describes the EB1 heating element function and its safety features.
Details the function of supply air and outdoor air temperature sensors.
Instructions for opening and accessing the horizontally wall-mounted unit.
Instructions for opening the sideways wall-mounted unit, including safety notes.
Details accessing the horizontal unit door with a maximum swing of 105°.
Steps for safely removing the unit door, including weight warning.
Instructions for cleaning the unit's fans, including precautions.
Steps for removing old filters and installing new ones, with installation notes.
Instructions for replacing worn brush strips in the heat exchanger.
Describes cleaning the rotor and tightening the rotor belt.
Guidelines for safely cleaning the external surfaces of the unit.
Explains the C160 control unit's general layout, LEDs, and air supply adjustment.
Details temperature adjustment and filter replacement reminders on the C160.
Describes C160 alarm indicators and the procedure for resetting alarms.
Details the C1600's touch panel, display, idle mode, and menu navigation.
Explains fan speed selection and the MAX TIMER function in the C1600 main menu.
Covers accessing system settings and adjusting supply air temperature via C1600.
Details programming the timer and daily/weekly schedules on the C1600.
Explains settings for time, date, language, filter reminders, and alarm notifications.
Describes the screen displaying current operating information like temperatures and system status.
Details accessing the advanced menu via PIN and overview of available functions.
Configuration of temperature regulation, neutral zones, and cooling functions.
Settings for fan regulation and air volume compensation for different speeds.
Covers sensor calibration, pressure guard activation, and fire/smoke detection setup.
Configuration for communication settings and system modes like HOME/AWAY.
Displays operating times and provides access to service functions like de-icing.
General| Energy Efficiency Class | A+ |
|---|---|
| Airflow | Up to 300 m³/h |
| Control System | Integrated control system with LCD display and remote control option |
| Power Supply | 230 V, 50 Hz |
| Weight | 25 kg |
To Next Page
