FLEXLUX Clement User Manual

26 27
Gas spring mechanism chaiselong
Clement Chaiselong · Volden Chaiselong
!
2.
3.
1.
Adjustment of the handle tension
Gas sprng mechanism · Built-in manual · Chaiselong
The gas spring
mechanism
The wire
Gas spring mechanism chaiselong
Clement Chaiselong · Volden Chaiselong
* UNDERNEATH THE CHAIR
Adjustment of the handle tension
Gas sprng mechanism · Built-in manual · Chaiselong
Adjustment of the seating position
1. Pull the handle to activate the gas sprng system.
! Do not use unnecessary force when using the handle. Otherwise you might ireparably damage the
chair.
2. At the same time, lean on the back and it will move backwards. Release the handle at the desired position.
To brng the back forwards, pull the handle without putting pressure on the back.
3. Te headrest can be pulled up, pushed down and tilted forwards.
! You have to tilt the headrest to it’s most forward position before you can tilt it back again.
Do not use unnecessary force when adjusting the headrest. Otherwise you might ireparably damage
the chair.
Over time, the wire connecting the handle to the gas sprng might lose tension. To retighten the wire, you
simply tur the adjustment nut undereath the chair.
For flly upholstered versions, simply unzip the cover undereath the chair to gain access to the wire.
On the Chaiselong chair the legs has to be dismounted to access the wire.

FLEXLUX Clement Specifications

General

Brand	FLEXLUX
Model	Clement
Category	Indoor Furnishing
Language	English