EasyManuals Logo

FLEXLUX Clement User Manual

FLEXLUX Clement
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
28 29
!
4.
Gravity base
Aarhus · Skagen
!
2.
3.
1.
!
3.
Build-in electric + battery
Clement Function · Volden Function · Marna
1.
2.
Build-in electric + battery
Clement Function · Volden Function · Marna
1. To recline, use the electrc motion touch panel under the rght ar. Te buttons are perfectly placed for
adjustment of the back angle and the integrated footrest. Tere are four buttons – two buttons control the
back and two control the footrest. Recline back and stop when you reach the desired position. Use the
touch panel to brng the chair back to the starting point.
! Do not use unnecessary force when pressing the buttons. Otherwise, you might ireparably damage
the chair.
2. Te headrest can be pulled up, pushed down and tilted forwards.
! You have to tilt the headrest to it’s most forward position before you can tilt it back again. Do not use
unnecessary force when adjusting the headrest. Otherwise you might ireparably damage the chair.
3. Clement Function and Volden Function: Adjustable height with the leg extender (optional).
Adjustment of the seating position
Adjustment of the seating position
Gravity base
Aarhus · Skagen
1. To recline: Lean backwards and the back will recline and the seat will slide forward. Stop when you reach
the desired position.
2. If the motion is not easy and smooth, or the chair does not maintain its position, then tighten or loosen the
handles on both sides simultaneously and with equal force.
! Note that the two handles operate in opposite directions of each other.
! Te handles do NOT lock the chair in a fixed position, but adjust the gravity-based recline system to
your weight and height.
! Do not use unnecessary force when operating the handles and do not tur handles frther than
where they stop naturally. Otherwise you might ireparably damage the chair.
3. Te headrest can be pulled up, pushed down and tilted forwards.
! You have to tilt the headrest to it’s most forward position before you can tilt it back again. Do not use
unnecessary force when adjusting the headrest. Otherwise you might ireparably damage the chair.
4. Adjustable height with the leg extender (optional). Also available for the footrest.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLEXLUX Clement and is the answer not in the manual?

FLEXLUX Clement Specifications

General IconGeneral
BrandFLEXLUX
ModelClement
CategoryIndoor Furnishing
LanguageEnglish