FlexRadio FLEX-6400 - User Manual

FLEX-6400/6600 Series Radio Micro SD Card Swap Instructions
Step 1: Carefully remove the top cover by removing the 4 screws on top cover and the 5 screws from
each side with a T8 Torx. (Note: Handle cover with care to avoid accidental scratching or denting.)
Step 2: Locate Micro SD card on CPU board.

FlexRadio FLEX-6400 Specifications

General

Brand	FlexRadio
Model	FLEX-6400
Category	Transceiver
Language	English

Summary

Micro SD Card Swap Procedure

Preparation and Initial Disassembly

Remove the radio top cover and locate the Micro SD card on the CPU board.

SD Card Replacement

Remove Kapton tape, swap the old SD card for a new one, ensuring proper seating.

Reassembly and Verification

Connect power/ethernet, power on for verification, power off, reapply tape, and reinstall cover.