FlexRadio FLEX-6400 - User Manual

To Next Page

FLEX-6400/6600 Series Radio Micro SD Card Swap Instructions

Step 1: Carefully remove the top cover by removing the 4 screws on top cover and the 5 screws from

each side with a T8 Torx. (Note: Handle cover with care to avoid accidental scratching or denting.)

Step 2: Locate Micro SD card on CPU board.

Other manuals for FlexRadio FLEX-6400

Need help?

Do you have a question about the FlexRadio FLEX-6400 and is the answer not in the manual?

Remove the radio top cover and locate the Micro SD card on the CPU board.

Remove Kapton tape, swap the old SD card for a new one, ensuring proper seating.

Connect power/ethernet, power on for verification, power off, reapply tape, and reinstall cover.

General