FLEX-6000 Signature Series – Maestro User Guide
Page 148
Copyright 2019 FlexRadio Systems. All Rights Reserved.
The Receiver Filter menu provides a number of commonly used filter widths, coordinated with the
mode of the Slice Receiver. Tap a filter button to select a filter. Note that custom adjustments can
be made with the front panel band width knobs.
The Mode menu provides a selection of the available operational modes. Sideband, AM, CW, digital,
FM and RTTY modes are available. Tap a mode button to invoke the mode in the receiver.
<->
Selecting a band from this menu will adjust the Panadapter to display all or part of the corresponding
amateur radio band. Selecting band buttons allows for rapid switching between views of the amateur
radio bands. Tapping on the XVTR button in the lower right swaps the buttons to a list of XVTR bands.
When the XVTR bands are shown an HF button will also be shown. Tap the HF button to swap back.
The tuned frequency of the Slice Receiver can be controlled with the keypad. Tap the number
buttons to enter a frequency in MHz, tap ENT to enter the value into the Slice Receiver.
To Next Page
Loading...
