FLEX-6000 Signature Series – Maestro User Guide
Page 21
Copyright 2019 FlexRadio Systems. All Rights Reserved.
5 CONNECTING TO A RADIO
After Maestro starts, a screen is displayed showing radios found on your local network. Maestro
locates these radios using a network broadcast protocol that is limited to the local subnet that
Maestro is connected to. If your radio is running and is connected to your local network, it should
appear in the Select Radio screen as shown below:
Select a radio in the Select Radio screen by tapping it. If the radio is already in use on another
computer or is connected to a third-party application that provides radio GUI functions, you will see
In Use next to the radio’s name.
To Next Page
Loading...
