FLEX-6000 Signature Series – Maestro User Guide
Page 36
Copyright 2019 FlexRadio Systems. All Rights Reserved.
If the data rate from the radio to Maestro is higher than can be supported by the radio’s Internet
connection use the Low BW Connect button to start the radio using panadapter settings that
minimize the Internet data transfer rate. These are temporary settings for the session that are not
retained in the radio’s persistence database.
SmartLink remains logged in after operating sessions have finished, so it is usually not necessary to
repeat the log in process to start another session. However, there are circumstances when it is
desirable to log out at the end of an operating session. When a session is not in progress, start
Maestro and navigate to the Select Radio screen, tap the logged in SmartLink user icon in the lower
right corner of the screen, then tap Logout in the Account Settings screen. If a session is in progress,
use the Switch Radio button on the Radio tab of the Main Menu to end the session and return to
the Select Radio screen, tap the logged in SmartLink user icon in the lower right corner of the screen,
then tap Logout in the Account Settings screen.
To Next Page
Loading...
