Need help?Do you have a question about the Flic Hub and is the answer not in the manual?
General| Ethernet | Yes |
|---|---|
| Connectivity | Bluetooth |
| Power | 5V |
| Wi-Fi | Yes (802.11 b/g/n) |
| Operating System | OS |
Ensure an active internet connection, Flic app installed on a phone, and a Flic button within Bluetooth range.
Connect via Micro USB. Initial red LED dims after ~60s, indicating readiness for app setup.
Use a power adapter supplying at least 1A for stable operation, especially with IR accessory.
Connect via Flic App for Wi-Fi or directly with an Ethernet cable to your router.
An active internet connection is required to connect Flic buttons. Test via network settings.
Tap '+' in the app, then press the Flic button. Pairing takes a few seconds.
Remove the button from its previous device via settings before pairing with the Hub.
Connect via 2.5mm connector and aim IR blaster towards the receiving device.
Effective range is ~10m. Ensure clear line of sight for optimal performance.
Connect any speaker via the 3.5mm audio jack for audible feedback on button presses.
Press the pinhole button for 10-15 seconds to reset the Hub to default settings.
Use the factory password (on label) if re-pairing after removal, or reset if custom password is lost.
Consult start.flic.io/faq for issues or contact support via the app or email.
Shortcut Labs declaration available at flic.io/doc. Full compliance list at flic.io/compliance.
Not a toy, avoid servicing, operate between -20°C and +54°C, clean with damp cloth.
Heavy usage shortens battery life. Flic is splash proof (IP44), not submersible.
24-month warranty against defects in materials and workmanship from date of delivery.
Excludes products from unauthorized resellers or damage from abuse, accidents, or moisture.
Complies with FCC Part 15 and Industry Canada RSS. Includes RF exposure warnings.
To Next Page