Safety Instruction for Xtender Machines
① Install the unit on a flat surface without any slope. Make sure to keep the
unit fastened and fixed using the castors mounted on the bottom of the
unit.
② Running excessively high or low voltage in the unit could cause a
malfunction or damage to the unit.
③ Charge or Discharge using proper Voltage and Ampere per the
specification and condition of battery.
④ Keep the unit clean, and vacuum the ventilation area regularly. Dust or
dirt on the ventilation will reduce the cooling capacity and cause the
performance degradation of the unit.
⑤ Never try to restore or discharge frozen batteries.
⑥ Operation of the unit including restoration and discharge should be
performed in open space with adequate flowing air.
C A U T I O N
CAUTION
8
To Next Page
Loading...