What to do if Active Voltage or Active Ampere are not displayed on Flight Systems Industrial Equipment?
If the Active Voltage or Active Ampere are not displayed on your Flight Systems Industrial Equipment, first, ensure that the CP terminal (Circuit Breaker) of the Xtender unit is turned “On”. Then, verify the connection with the batteries.
How to fix booting not completed on LCD monitor for Flight Systems Industrial Equipment?
If booting is not completed on the LCD monitor of your Flight Systems Industrial Equipment, take the following steps: 1. Check the electricity connection of the Xtender unit. 2. Ensure the electric power switch is in the “On” position. 3. Verify the emergency switch is not in the “Off” position.
Why is temperature not well recognized on Flight Systems Industrial Equipment?
If the temperature is not being correctly recognized by your Flight Systems Industrial Equipment, check that the thermometer sensor cable is securely connected to the temperature terminal of the Xtender unit.
Allows selection of data to display on the graphic screen.
Enables checking of Xtender operation details via saved log files.
Protects Xtender settings from unauthorized changes.
Function to view graph details during operation or from log files.
Procedure for downloading the most recent software for the Xtender.
Steps for updating the Xtender's firmware and software.
Guide on installing the monitoring software on a PC.
Details on controlling and managing the Xtender via PC.
Instructions for accessing and printing operation logs.
Explains additional features of the monitoring program.
Lists and explains common error messages displayed by the Xtender.
Describes alarm messages indicating operational status or issues.
Details the name and functional parts of the 93-M1001 model.
Explains the name and functional parts for models 93-M1005 and 93-M1007.
Describes the name and functional parts for the 93-M1009 model.
Provides detailed wiring instructions for the 93-M1001 model.
Details wiring instructions specific to the 93-M1005 model.
Covers wiring instructions for the 93-M1007 model.
Explains the cable connection procedure for the 93-M1009 model.
Guides through the initial power-on and system boot-up process.
Explains the main configuration menu and its options.
Details the process for calibrating the touch screen coordinates.
Describes how to activate and use the screen lock feature for security.
Explains Bluetooth connectivity setup for the Xtender.
Covers the auto-off function for the LCD backlight for energy saving.
Details how to change the display language of the Xtender interface.
Instructions for updating the Xtender's software via SD card.
Overview of the operation menu options available on the main screen.
Details the main operation screen layout and displayed information.
Explains how to input specific voltage, ampere, and time values in manual mode.
Describes how to start and manage manual restoration or discharge cycles.
Explains how to switch between information and graph views.
Details the two-step process for battery restoration in manual mode.
Explains the constant ampere discharge process in manual mode.
Guides on setting voltage, ampere, and time for program modes.
Shows the interface for configuring program mode settings.
Describes predefined pulse scenarios for restoration cycles.
Allows selection of data to display on the graphic screen.
Enables checking of Xtender operation details via saved log files.
Protects Xtender settings from unauthorized changes.
Function to view graph details during operation or from log files.
Instructions for updating the Xtender's software via SD card.
Overview of the PC monitoring program and its capabilities.
Description of the hardware used for PC integration.
Steps for installing the monitoring software on a PC.
Explains the core functions of the integrated monitoring program.
Details how to connect and control Xtender units via the monitoring program.
Guides on controlling Xtender units using the PC software.
Instructions for connecting and monitoring BMS units.
Explains synchronized control of Xtender and BMS units.
Instructions for viewing and printing log files from the monitoring program.
Configuration settings for the monitoring program's display and behavior.
Details on tag function for convenient log file searching.
Explains how to add and review comments in log files.
Provides access to manuals, contact information, and update checks.
Lists and explains common error messages displayed by the Xtender.
Describes errors related to voltage and current limits during operation.
Explains errors concerning time limits, frequency mismatch, and program activation.
Covers errors related to communication issues and SD card problems.
Details errors related to electric fan operation and internal temperature.
Explains alarm messages indicating program completion or status.
General| Frequency | 50/60 Hz |
|---|---|
| Input Voltage | 120-240V AC |
| Protection | Overload, Short Circuit |
| Output Voltage | 12V DC, 24V DC |
| Efficiency | 90% |
To Next Page