Flintec FAA-27 - Default Chapter; Table of Contents

FAA-27, Technical Manual, Rev. 1.1, June 2014
Page 1 of 21
Table of Contents
1. Safety Instructions ........................................................................... 2
2. Declaration Of Conformity ............................................................... 3
3. Front View, Features And Specifications ......................................... 4
4. Installation And Commissioning ....................................................... 7
4.1 Mechanical Installation .................................................................. 8
4.2 Load Cell Connection .................................................................... 8
4.3 Analogue Output Connection ........................................................ 8
4.4 Changing The Analogue Output .................................................... 9
4.5 Serial Port Connection ................................................................ 10
4.6 Commissioning ........................................................................... 10
5. Adjustments ................................................................................... 11
5.1 Adjustment With Rotary Switches ............................................... 11
5.2 Fast Adjustment To Nominal Output Range ................................ 13
5.3 eCal Electronic Adjustment Via xFace Software ......................... 13
5.4 Adjustment (eCal) With PLC ....................................................... 14
5.5 Testing the Scale Performance ................................................... 16
6. Setpoints ....................................................................................... 17
6.1 Setpoint Connection .................................................................... 17
6.2 Setpoint Adjustment ................................................................... 17
6.3 Adjustment To The Load On The Scale ...................................... 17
6.4 Adjustment By Measuring The Analog Output ............................. 17
7. Operation ....................................................................................... 18
8. Programming With xFace Software Over RS232 ........................... 19
8.1 Installation Of xFace Software .................................................... 19
8.2 Connection To The xFace Software ............................................ 19
9. Trouble Shooting ........................................................................... 21