What to do if the Flintec Amplifier input signal is out of range?
If the Flintec Amplifier input signal is out of range, it may be due to the need for calibration. Check the output circuit and cabling. It can also indicate a board failure.
Summary of critical warnings and cautions for safe operation and maintenance.
Guidelines for control cabinet design and instrument placement to ensure system reliability and safety.
Guidelines for physical mounting and environmental conditions for instrument installation.
Instructions for wiring load cells, including resistance requirements for proper connection.
Guidance on connecting analogue output signals and selecting the output type.
Detailed steps for performing zero and gain adjustments using the front panel rotary switches.
Interpreting front panel LED indicators to diagnose operational issues and board failures.
To Next Page
General