EasyManuals Logo
Home>FLIR>Accessories>A50 Series

FLIR A50 Series User Manual

FLIR A50 Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Safety information
2
CAUTION
Do not use too much force when you clean the infrared lens. Damage to the infrared lens or to the anti-
reflective coating of the lens can occur. For cleaning, refer to 17 Cleaning the camera.
CAUTION
Applicability: Cameras where you can remove the lens and expose the infrared detector.
Do not use compressed air of lower quality than “Process air” when you remove dust from the detector.
Air of lower quality than “Process air” can contain high levels of contaminants. Damage to the detector
can occur.
CAUTION
Applicability: Cameras with an automatic shutter that can be disabled.
Do not disable the automatic shutter in the camera for a long time period (a maximum of 30 minutes is
typical). This can have an unwanted effect on the accuracy of the camera.
Note The encapsulation rating is only applicable when all the openings on the camera
are sealed with their correct covers, hatches, or caps. This includes the compartments
for data storage, batteries, and connectors.
#T810579; r. AB/78918/78918; en-US
3

Table of Contents

Other manuals for FLIR A50 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR A50 Series and is the answer not in the manual?

FLIR A50 Series Specifications

General IconGeneral
BrandFLIR
ModelA50 Series
CategoryAccessories
LanguageEnglish

Related product manuals