FLIR E60 - Changing the Camera Settings; Changing Image Mode

E. Description of Screen elements
F. Changing the camera settings
□ Measuring the hottest/coldest temperature within an area
 This displays a moving spot meter that indicates the hottest temperature.
 The spot meter can be activated by following these steps:
1. Push the centre of the navigation pad. This displays a toolbar.
2. On the toolbar, select Measurement.
3. On the toolbar, select Hot spot for hottest temperature and select Cold spot for coldest
temperature.
□ Changing image mode
 The camera can operate in five different image modes:
1. Thermal MSX (Multi Spectral Dynamic Imaging): The camera displays an infrared image
where the edges of the objects are enhanced.
2. Thermal: The camera displays a fully thermal image.
1. Main menu toolbar.
2. Submenu toolbar.
3. Spot meter.
4. Temperature of the spot.
5. Status icons for battery.
6. Temperature scale.