Screen elements
11
1. Basic mode (FLIR K45, FLIR K55).
TI Basic NFPA mode (FLIR K65).
A multipurpose mode for the initial fire attack with life-saving operations and control
of the fire.
2. Black and white firefighting mode. A multipurpose mode for the initial fire attack with
life-saving operations and control of the fire.
3. Fire mode (FLIR K45, FLIR K55).
Similar to Basic mode but with a higher-temperature starting point for the heat
colorization.
TI Basic PLUS NFPA mode (FLIR K65).
Similar to TI Basic NFPA mode but with additional functionality.
4. Search and rescue mode. Optimized for maintaining high contrast in the infrared im-
age while searching for people.
5. Heat detection mode. Optimized for searching hotspots during overhaul after the fire
is out.
6. Low-sensitivity mode indicator. The indicator is displayed when the camera identifies
a hot area and automatically switches to low-sensitivity mode in Basic mode / TI Ba-
sic NFPA mode, Black and white firefighting mode, or Fire mode / TI Basic PLUS
NFPA mode.
7. Overheating indicator. The indicator provides a visual warning to the user that the
thermal imager is about to shut down due to internal overheating.
#T559946; r. BG/87484/87484; en-US
19
To Next Page
Loading...
