Operation
12
12.11 Viewing saved images
When you save an image, the image is stored in the camera’s archive. To display the im-
age again, you can recall it from the archive.
Follow this procedure:
1. Push the Mode and Zoom buttons at the same time. This displays the main menu.
2. Select by pushing the Mode button. This displays the screen below.
3. In the archive, do the following:
• Select
by pushing the Mode button to navigate to the next image.
• Pull the trigger to navigate to the previous image.
• Select
by pushing and holding the Zoom button to enlarge a specific image.
4. Select
by pushing the On/off button to exit the archive.
#T559946; r. BG/87484/87484; en-US
33
To Next Page
Loading...
