Safety information
2
CAUTION
Only use with batteries that have the part number T199368 on them (that FLIR Systems AB supplies).
Damage to the equipment can occur if you do not obey this.
WARNING
Make sure that you only change the batteries in a known safe area. If you do not obey this, an explosion
can occur. An explosion can cause death or injury to persons and damage to the equipment.
CAUTION
Do not open unless you are sure that there are no flammable materials in the area. A fire or an explosion
can occur. This can cause injury or death to persons and damage to the equipment.
CAUTION
Do not use the connection port while it is in a classified (danger) area. Injury to persons and damage to
the equipment can occur.
Note The encapsulation rating is only applicable when all the openings on the camera
are sealed with their correct covers, hatches, or caps. This includes the compartments
for data storage, batteries, and connectors.
2.1 Label affixed to the camera
2.1.1 FLIR K45 and FLIR K55
2.1.2 FLIR K65
2.2 Marking recommendations and restrictions
Applicability: FLIR K65
The camera body may not be physically marked. Such markings include labels, engrav-
ings, printing, melting, etc. If the camera needs to be identified or tracked, such identifi-
cation shall be carried out by adding a custom boot image in the camera firmware, see
section 12.14 Configuring the camera.
#T559946; r. BG/87484/87484; en-US
5
To Next Page
Loading...
Need help?
General
