EasyManuals Logo

FLIR K55 User Manual

FLIR K55
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Safety information
2
CAUTION
Applicability: Cameras with one or more batteries.
The temperature range through which you can remove the electrical power from the battery is -15°C to
+50°C (+5°F to +122°F), unless other information is specified in the user documentation or technical
data. If you operate the battery out of this temperature range, it can decrease the performance or the life
cycle of the battery.
CAUTION
Applicability: Cameras with one or more batteries.
When the battery is worn, apply insulation to the terminals with adhesive tape or equivalent materials
before you discard it. Damage to the battery and injury to persons can occur if you do not do this.
CAUTION
Applicability: Cameras with one or more batteries.
Remove any water or moisture on the battery before you install it. Damage to the battery can occur if
you do not do this.
CAUTION
Do not apply solvents or equivalent liquids to the camera, the cables, or other items. Damage to the bat-
tery and injury to persons can occur.
CAUTION
Be careful when you clean the infrared lens. The lens has an anti-reflective coating which is easily dam-
aged. Damage to the infrared lens can occur.
CAUTION
Do not use too much force to clean the infrared lens. This can cause damage to the anti-reflective
coating.
CAUTION
Do not change the standard fire-fighting procedures when you use a FLIR K series camera. The FLIR K
series camera is not a replacement technology.
CAUTION
Do not use the FLIR K series camera without the correct training. If the persons that operate the camera
do not have the correct training, an incorrect analysis of the infrared images can occur. Thus, incorrect
decisions during the firefighting can be made.
The training must include:
How a thermal camera operates and its limits
How to interpret an image
How to work safely with the camera.
CAUTION
Make sure that you do not use a torque value that is more than 80 Ncm on the Torx T20 screw. Damage
to the camera can occur if you do not obey this.
CAUTION
Only use the equipment as given in the applicable manufacturer’s instructions. If you do not obey this,
the protection that the equipment gives can become unsatisfactory. Damage to the equipment can
occur.
#T559946; r. BG/87484/87484; en-US
4

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR K55 and is the answer not in the manual?

FLIR K55 Specifications

General IconGeneral
Detector TypeUncooled Microbolometer
Resolution320 x 240 pixels
Display4" LCD, 320 x 240 pixels
Battery Life4 hours
Video RecordingYes
Laser PointerYes
IP RatingIP67
Field of View51° x 38°
Temperature Range-20°C to 650°C
Battery TypeLi-ion
Spectral Range7.5 - 13 μm
Storage Temperature-40°C to +70°C
Thermal Sensitivity< 30 mK at 30°C

Related product manuals