FLIR Lepton 3.5 - The Information Contained Herein Does Not Contain Technology as Defined by the EAR, 15 CFR 772, Is Publicly Available

FLIR LEPTON® Engineering Datasheet
The information contained herein does not contain technology as defined by the EAR, 15 CFR 772, is publicly available,
and therefore, not subject to EAR. NSR (6/14/2018).
Information on this page is subject to change without notice.
Lepton Engineering Datasheet, Document Number: 500-0659-00-09 Rev: 203
41
Parameter
Power-
On
Default
Section in this document
Telemetry
Line Location
SYS Gain Mode Object
12,11
(startRow, startCol, endRow, endCol)
(0,0,59,79) or
(0,0,119,169): GainROI
25: P_hi_to_lo
90: P_lo_to_hi
115: C_hi_to_lo
85: C_lo_to_hi
388: T_hi_to_lo
358: T_lo_to_hi
Gain States, page 22
B8-26
VID Color LUT Select
Fusion
Video Output Format Modes, page 36
n/a
VID User Color LUT Upload /
Download
n/a
Video Output Format Modes, page 36
n/a
OEM FFC
n/a
FFC States, page 18
A3-4
OEM Video Output Format
Raw14
Video Output Format Modes, page 36
A3-4
OEM GPIO Mode
Disabled
GPIO Modes, page 39
n/a
OEM GPIO VSYNC Phase
Delay
0 lines
Frame Synchronization, page 53
n/a
RAD Radiometry Control
Enabled
Radiometry Modes, page 29
n/a
RAD TLlinear Enable State
Enabled
Radiometry Modes, page 29
C48
RAD Tlinear Resolution
0.01
Radiometry Modes, page 29
C49
RAD Spotmeter ROI
(29,30,39,40)
Radiometry Modes, page 29
C54-57
11
Note different order of row/col compared to other ROI.