EasyManuals Logo
Home>FLIR>IP Camera>Photon

FLIR Photon User Manual

FLIR Photon
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
60
Appendix D
IR Streams
The raw IR streams use RTP/UDP/IP
for transport. The transport format is
according to RFC 4175 (RTP Payload
Format for Uncompressed Video).
The raw image frame rates are up to
about 7.8 Hz.
These raw formats are provided:
Table 2.
0 16-bit uncompressed IR image linear in signal
1 16-bit uncompressed IR image linear in
temperature, resolution 0.1 K (range 06553 K)
16-bit uncompressed IR image linear in
temperature, resolution 0.01 K (range 0655 K)
On the client side, FLIR supplies a
DirectShow component (Win32, PC
platform) which is able to setup and
receive the IR streams. The IR stream is
reassembled and forwarded as samples
of FOURCC type Y160 (this FOURCC type
is only preliminary at this stage). The
DirectShow component can be used by
any application that wishes to display the
IR stream or want to grab samples from
the stream.
DHCP
The camera supports the client part of
the Dynamic Host Conguration Protocol
(DHCP).
Remote Detection
Multicast DNS (Bonjour)
To query Bonjour for local FLIR IR
cameras, use:
Service name: ir-ircam
Protocol type: _tcp
Domain: local
Table 3: TXT records
Name Value Explanation
Model S
ID A320 Camera ID
GID Gen_A Generic ID
SI FFF_RTSP Streaming Interface
SIV 1.0.0 Streaming interface
version
CI RTREE Command interface
CIV 1.0.0 Command interface
version
For more information, see
www.dns-sd.org.
For complete information, see FLIRs A320
ICD manual.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR Photon and is the answer not in the manual?

FLIR Photon Specifications

General IconGeneral
BrandFLIR
ModelPhoton
CategoryIP Camera
LanguageEnglish

Related product manuals