910-0001-00-MAN-R06 FLIR Proprietary Information Page 22 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
2.2.2 Radar Mode Change (applies only to R3D and R5D radars)
The R3D and R5D supports a non-Doppler mode, the FastScan mode, and three Doppler modes (short,
medium and long time-on-target). Changes of mode, range or time-on-target are made by using an icon
and a drop-down list in Radar Console, as shown in Figure 7 and Figure 8. The toggle button (Figure 7)
allows the user to conveniently switch between FastScan and Doppler modes.
Figure 7 - Changing Range in FastScan Mode
To Next Page
Loading...
Need help?
General
