Advanced Thermal Solutions SC5000 User Manual
DCOO2U-L SC5000 User Manual Page 12
6. Using your camera
6.1. Addition of an additional lens
Lenses are fragile elements.
Take the greatest care at the time of their handling, particularly on the
level of the lenses.
Lens connectors are fragile elements.
Take great care not to touch the connector while handling the lens.
Lenses can be heavy.
Some lenses weight several hundred grams. Be careful not to be
surprised by its weight.
PUT OFF THE LENS: Turn the ring of the lens bayonet of a quarter of turn
counter clockwise while placing a hand below. It is not necessary to
strongly tighten ring to turn it
Place caps on the lens and store it.
Never force on lens.
Check that optics is clean before assembling it in the camera. See
section 8.1 for the maintenance of optics
PUT ON THE LENS: Remove the caps of the lenses that you wish to use
and place it gently in the bayonet. Place the locating pin of mounting
opposite to the corresponding hole in lens. A white dot indicates the
position. Gently insert the lens and turn the ring clockwise.
To Next Page
Loading...
Need help?
General
