Floe 510-27500-00 User Manual

SHEET 1 OF 28
FLOE QUICK ATTACH ROLL IN
X-DEEP & XX-DEEP WHEEL KIT
ASSEMBLY INSTRUCTIONS AND OWNERS MANUAL
4’, 5’, 6’ & 8’ WIDE DOCK SECTIONS
KIT P/N 510-27500-00, 510-27510-00, 510-27600-00, 510-27610-00
TOOLS REQUIRED
-(2) 9/16” SOCKETS/WRENCHES
-3/4” WRENCH/SOCKET
-CORDLESS DRILL WITH SOCKET
ADAPTER & 1-1/8” SOCKET OR
FLOE SPEED WRENCH
-TORQUE WRENCH
-TAPE MEASURE
-LEVEL
-BLOCKING MATERIAL
INSTRUCTION P/N: 610-27500-00
RELEASED 9/1/22
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com
*DOCK NOT INCLUDED
NOTE:
FOR USE IN APPROXIMATELY
49” - 89” OF WATER (X-DEEP)
68”-108” OF WATER (XX-DEEP)
WE RECOMMEND THAT THE
LOWER DOCK FRAME IS A
MINIMUM OF 8” ABOVE THE
WATER WHEN PROPERLY
ADJUSTED. HOWEVER, IF YOU
HAVE HIGH WAVE
CONDITIONS THAT
COMMONLY EXCEED 15”, WE
RECOMMEND THAT YOU RAISE
YOUR DOCK ACCORDINGLY.
NEVER ADJUST YOUR DOCK LEGS WITH
AN IMPACT WRENCH. NEVER ADJUST
YOUR DOCK LEGS WITH MORE THAN 15
FT-LBS OF FORCE. APPLYING TOO MUCH
FORCE TO YOUR DOCK LEGS WILL
DAMAGE THE MECHANISM.

Floe 510-27500-00 Specifications

General

Brand	Floe
Model	510-27500-00
Category	Boating Equipment
Language	English