Floe VSD 8000 - Page 13

13
STEP 4

ATTACH A FRAME BEAM BETWEEN CORNER POSTS “A” AND
“D” USING (FIGURE 4.4 & 4.5).
DO NOT TIGHTEN.
NOTE THAT BOLTS WILL BE INSTALLED IN UPPER
HOLES ONLY AT CORNERS “A” & “D”.
 USE A FRAMING SQUARE TO ENSURE THAT THE LIFT FRAME IS
SQUARE BEFORE PROCEEDING TO THE NEXT STEP (FIGURE
4.6A & 4.6B).
FIGURE
4.4
FIGURE
4.5
FIGURE
4.6A
FIGURE
4.6B