FLORABEST 280288 - Maintenance Intervals

16
Maintenance Intervals
Regularly carry out the maintenance work listed in the “maintenance intervals” table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting per-
formance and avoids accidents.
Maintenance Work
(See “cleaning and mainte-
nance“)
Before After
After 1
st
5 Hrs.
After
8Hrs.
After
50Hrs.
Annual
Work
Check and tighten screws, nuts
and bolts

Check the engine oil level/petrol
petrol if required
 
Clean operating elements / the
area around the silencer
 
b

Change the engine oil
  
a

Clean/adjust the spark plug
Replace the spark plug


Check the silencer and spark
catcher
b
 
Clean the air cooling system
a,b

a
Replace more often if there is a high level of dust or heavy dirt
b
See Briggs & Stratton instruction manual
GB IE NI