thesawchainandtheguiderailmay
notbemorethan2mm.
1. Turnbladexingscrew(4)anticlock-
wisetoslightlyloosenblade(2).
2. Setthetensionofsawchain1using
chaintensioningdevice(5).
Turnthisquicktensioningdevice
clockwisetoincreasethetension.
Inthesameway,thetensionofsaw
chain(1)canbedecreasedbyturning
anticlockwise.
3. Turnbladexingscrew(4)clockwise
toretightenblade(2).
Wheresawchain(1)hasbeennewlyten-
sioned,readjustthechaintensionaftera
shortperiodinoperation.
Checkthechaintensionbefore
eachuseofthehighpruningsaw.
Chain lubrication
Blade(2)andsawchain(1)must
alwaysbeoiled.Non-observance
ofthiswillresultinincreasedwear
onthebladeandsawchain.
Thehighpruningsawisequippedwithan
oilautomaticsystem.Assoonasthemo-
torisspeededup,theoilalsoowsfaster
tothechainbar(2).
10 min
A fulltankwilllastfor
approx.10minutesof
continuousoperation.
Checktheoillevelin
goodtime.
• Checktheoillllevelandregularly
topupwithoil.
• UseGrizzlybio-oil;thisproductcon-
tainsadditivesthatreducewearand
tearanddoesnotdamagethepump
system.bio-oilisavailablefromour
Service-Center(seeP.19forthead-
dress).
• IfyouhavenoGrizzlybio-oilavail-
able,usechainlubricationoilwith
lowadhesiveadditivecontent.
1. Unscrewtheoilllcap(23)andll
upwithchainoil.
2. Wipeoffanyspilledoilandclosethe
capagain.
Notethatthesawcanre-oil.
Operation startup
Observethecountry-specicand
municipalregulations.
Donotworkwiththehighpruning
sawduringgeneralordinaryor
prescribedquietperiods.
• Thetensionofsawchain(1)
• Theoillevel
• Allnutsandscrewsaresittingrmly
• Onlyremovebladecover(24)atthe
lastminute
• Settheworkinglengthofthetelescop-
icarmbeforeswitchingontheequip-
ment
• Checkthatshoulderstrap(12)isina
comfortablepositionthateasesyour
holdonthehighpruningsaw
• Ensurethatyouarewearingprotec-
tiveclothing