Flott TBZ 13 Plus - Lubrication Schedule

80 pages

Save Page as PDF

To Next Page

To Previous Page

Maintenance of the Machine

212601 14/03/2023

9.6 Lubrication Schedule

Main Page

Table of Contents3
Introduction6
Pillar Drilling Machine7
Technical Data7
Rating Plate of the Pillar Drilling Machine8
Intended Use9
Improper Use9
Legal Provisions10
Liability10
Warranty11
Copyright11
Operating Manual12
Definition of Terms12
Illustrations and Signs in this Text14
Structure and Design of Safety Instructions15
Safety Instructions17
General Safety Instructions17
The Operating Manual17
The Duties of the Operating Company18
The Safety of the Machine18
The Working Staff19
The Workplace19
Safety Instructions for the Use of the Machine20
Transport to the Installation Site20
Commissioning, Operation, Decommissioning21
Maintenance and Repair22
Disposal23
Safety Devices of the Machine24
Technical Description25
Functional Description25
Machine Overview26
Installation of the Machine27
Before Using the Machine29
Mounting Accessories and Options29
Mount Drill Chuck29
Installing the Cutter30
Set Drill Guard and Press31
Installing Machine Vice32
Adjusting the Height of the Machine33
Adjust Turbo Drill and TB 10 Plus in Height33
Adjusting SB 13/15 Plus, TB 13/15 Plus and TBZ 13/15 Plus in Height33
Connecting the Machine Electrically34
Checks before Commissioning35
Operating the Machine36
Control Elements of the Machine36
Drilling through Hole39
Drilling Hole with Limiter41
Bore with Depth Adjustment43
Tapping with Depth Adjustment46
Changing Drilling Parameters49
Calling up the Operator Menu of the Control System51
Shutting down the Machine52
Switching the Machine off52
Press Emergency Stop of the Machine53
Measures before Maintenance and Repair54
Troubleshooting55
Error Messages on the Display55
Other Malfunctions and Remedies56
Release of the Machine after a Fault57
Maintenance of the Machine58
Inspection and Maintenance Intervals58
Dismantling Drill Chuck60
Dismantling Drill Chuck with Hexagon Screw60
Dismantling Drill Chuck with Pin Punch61
Installing/Removing the Protective Hood62
Remove Protective Hood62
Installing the Protective Hood63
Tensioning or Replacing Ribbed V-Belt65
Replace Control Panel67
Lubrication Schedule69
Repair70
Spare Part List71

Flott TBZ 13 Plus - Lubrication Schedule

Table of Contents

Related product manuals