What to do if my Flott TB 13 Plus Drill machine does not work?
If your Flott Drill machine isn't working, first ensure the power plug is properly plugged in and that the emergency stop button is not pressed. If the emergency stop button is activated, unlock it. If the issue persists, try acknowledging with the rotary switch/push-button or restarting the machine. If none of these steps resolve the problem, consider contacting FLOTT Service.
What to do if I see error messages on the Flott Drill display?
If you are seeing error messages on the display of your Flott Drill, try acknowledging them with the rotary switch/push-button. If this does not resolve the issue, restart the machine. If the problem continues, contact FLOTT Service.
Why is the display off on my Flott TB 13 Plus Drill?
If the display is off on your Flott Drill, it might be in standby mode. Try acknowledging with the rotary switch/push-button. If the display remains off, restart the machine. If the issue still persists, contact FLOTT Service.
Technical specifications, rating plate, intended and improper use.
Covers manual, company duties, staff, and workplace safety.
Safety guidelines for transport, operation, maintenance, and disposal.
Details on protective hood, drill guard, clamping lever, and emergency stop.
Guidelines for safely connecting the machine to the power supply.
Step-by-step guide for drilling a through hole.
How to use the emergency stop button in critical situations.
Interpretation of error codes and their remedies.
Common faults, causes, and solutions not shown on display.
To Next Page
General
