Why Flott Drill machine does not work?
The Flott Drill might not be working because the power plug isn't properly plugged in or the emergency stop button is activated. Ensure the power plug is securely connected and unlock the emergency stop button. If the issue persists, try acknowledging with the rotary switch/push-button, restarting the machine, or contacting FLOTT Service.
What to do if the Flott Drill display is off?
If the Flott Drill display is off, it could be in standby mode. Try acknowledging with the rotary switch/push-button to bring it back online. If that doesn't work, try restarting the machine or contact FLOTT Service.
How to fix Flott Drill guard active issue?
If the drill guard is active on your Flott Drill, it means the drill guard is not in its protection position. To resolve this, swing the drill guard into the protective position in front of the cutter and confirm with the rotary switch/push-button.
What to do if Flott Drill shows error code?
To address this error, try acknowledging it with the rotary switch/push-button. If the error persists, restart the machine or contact FLOTT Service.
Technical specifications and data for the pillar drilling machine models.
Details on liability, warranty, and copyright for the operating manual.
Explanation of manual structure, symbols, and safety instruction design.
General guidelines for safe operation, potential dangers, and the role of the operating manual.
Specific safety precautions for transporting, commissioning, operating, and maintaining the machine.
Description of essential safety features like protective hood, drill guard, and emergency stop.
Overview of the machine's design, drive system, and operational controls.
Identifies and labels the main external components of the pillar drilling machine.
Instructions for installing optional accessories like drill chuck and machine vice.
Step-by-step guide for securely inserting drills, reamers, or taps into the drill chuck.
Guidance on correctly adjusting the drill guard's height and position for safety.
Procedure for securely attaching the machine vice to the drilling table for workpieces.
Instructions on how to adjust the drilling table or machine head for optimal height.
Steps for safe electrical connection, including voltage checks and RCD requirements.
Ensuring workplace safety, correct PPE, and functional safety devices before operation.
Identification and function of key control elements like the control panel and E-stop.
Step-by-step guide for performing through-hole drilling operations safely.
Instructions for drilling holes with precise depth control using the mechanical limiter.
Guide to boring operations using the control system for depth adjustment and signals.
Procedure for tapping threads, including automatic spindle reversal for tap removal.
How to change spindle speed, zero point, and drilling/tapping depth settings.
Steps to navigate and use the operator menu for parameter settings and diagnostics.
Steps for safely turning off the machine, including power disconnection.
Instructions on how to use the emergency stop button for immediate machine shutdown.
Precautions for electrical safety, isolation, and hazard warnings before servicing.
Guide to interpreting error messages displayed by the control system.
Troubleshooting table for common issues not shown on the display, with causes and remedies.
Procedure for re-enabling the machine after a fault has been identified and eliminated.
Overview of minimum maintenance tasks required for trouble-free operation.
Step-by-step instructions for safely removing the drill chuck from the spindle.
Procedures for removing and reinstalling the protective hood for maintenance access.
Steps to correctly reinstall the protective hood after maintenance work.
Instructions for checking, tensioning, or replacing the ribbed V-belt.
Procedure for replacing defective control panels, including electrical safety measures.
Schedule for lubrication points and recommended lubricants based on operating hours.
Information on safe repair practices, electrical safety, and consulting the manufacturer.
To Next Page
General
