What to do if my Flott TB 10 Plus Drill machine does not work?
If your Flott Drill machine isn't working, first ensure the power plug is properly plugged in and that the emergency stop button is not pressed. If the emergency stop button is activated, unlock it. If the issue persists, try acknowledging with the rotary switch/push-button or restarting the machine. If none of these steps resolve the problem, consider contacting FLOTT Service.
What to do if I see error messages on the Flott Drill display?
If you are seeing error messages on the display of your Flott Drill, try acknowledging them with the rotary switch/push-button. If this does not resolve the issue, restart the machine. If the problem continues, contact FLOTT Service.
Why is the display off on my Flott Drill?
If the display is off on your Flott Drill, it might be in standby mode. Try acknowledging with the rotary switch/push-button. If the display remains off, restart the machine. If the issue still persists, contact FLOTT Service.
Provides fundamental safety guidelines applicable to all operations and personnel.
Details safety precautions specific to operating, commissioning, and maintaining the machine.
Describes the machine's integrated safety features and their functions.
Crucial steps and warnings for safely connecting the machine to the power supply.
How to use the emergency stop button for immediate shutdown in danger.
Essential safety precautions prior to performing any maintenance or repair work.
Guides on interpreting display error messages and their solutions.
Addresses common machine issues not shown on the display and their fixes.
Overview of regular maintenance tasks and recommended intervals.
To Next Page
General
